The MB Tension Sensor was designed to be used with a tension controller or tension meter.
It supports a wide range of products, with any tension range. The MB Tension Sensor has long been a strong seller, since sales were launched 20 years ago.
|Rated tension (N)||(50)100||200||(50)100||200||500||1000||(2000)
|Roll displacement (μm/N)||2.38||1.19||2.63||1.30||0.44||0.22||0.071||0.045||0.023|
|Allowable roll weight (kg)||10||20||10||20||50||100||300||350||700|
|Allowable overload (N)||Ten times rated load|
|Unit weight (kg)||1.5||0.8||3.4||16.1||24|
|Tension resultant direction||Forward or reverse possible||Forward only (reverse impossible)|
|Mounting angle||Any desired angle|
|Supply voltage||DC +6V|
|Ambient temperature||-10 to +60℃|
1. Figures for rated tension and allowable roll weight are for double-sided detection. For single detection the above figures should be halved.
2. A 5m cable with connectors for connection to an amplifier is supplied.
3. MB05, MB11 and MB25 can be wall mounted with a bracket. If the unit is equipped with a bracket, "-W" is added to the end of its model name. e.g.
4. Sensors with inherently intrinsic safety construction are also available. "S" is added to the end of the corresponding model name. e.g. MB11BS.
Cảm biến lực căng MB Tension Sensor-Nireco Vietnam-TMP Vietnam
- AS Scholer + Bolte
- Bihl Wiedemann
- Brooks Instrument
- ELETTROTEK KABEL
- Elco Holding
- Fotoelektrik Pauly
- Fantini cosmi
- Fox Thermal
- IPF ELECTRONIC
- IPF Electronic
- JINDA ACTUATOR
- Krebs & Riedel
- Kewo Drive
- KIEPE ELEKTRIK
- Land Ametek
- Pavone Sistemi
- PCI Instrument
- Red Lion
- Telco Sensor
- Van der Graaf
- Wise control
- TDK Lambda
- Young tech
- Lanics Laser Electronic
- Tek Trol