Máy kiểm tra độ bền dây nối đầu cốt WT3-201 hãng Mark 10.

Tăng Minh Phát là đại lý phân phối thiết bị đo, kiểm tra độ bền, lực căng giữa đầu cốt và dây nối WT3-201 hãng Mark 10 tại Việt Nam.

Thông tin sản phẩm : Wire Crimp Pull Tester Model WT3-201

Datasheet : Wire Terminal Pull Tester WT3-201.pdf

The WT3-201 wire crimp pull tester is designed to measure the pull-off force of crimped wire and tube terminations. An ergonomic lever allows for easy application of up to 200 lbF (1,000 N) of crimp pull force. Adjustable wire terminal grip contains multiple slots for wire diameters up to AWG 3 (0.25 in [6.3 mm]). The tester accommodates most insulation types. Samples can be sent to Mark-10 for evaluation prior to purchase.

Capacity x Resolution:		200 x 0.1 lbF, 3200 x 2 ozF, 100 x 0.05 kgF, 1000 x 0.5 N, 1 x 0.0005 kN
Accuracy:		±0.2% of full scale
Wire gauge range		AWG30 - AWG3
Wire diameter range:		0.01 - 0.25 in [0.3 - 6.3 mm]
Minimum sample length:		6.5 in [165 mm], excluding termination
Maximum sample elongation:		1.15 in [29.2 mm]
Power:		AC or rechargeable battery. Multi-step low battery indicator is displayed, gauge shuts off automatically when power is too low.
Battery Life:		Backlight on: up to 7 hours of continuous use  Backlight off: up to 24 hours of continuous use
Sampling rate:		7,000 Hz
Outputs:		USB / RS-232: Configurable up to 115,200 baud. .  Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatible Devices. Analog: ±1 VDC, ±0.25% of full scale at capacity. Set points: Three open drain lines.

		Ring terminal fixture (WT3002) Multiple pin sizes are provided, from 1/8" to 3/8" [3.2 to 9.5 mm] dia.
		Machinable blank terminal fixture (WT3003) For unique sample shapes and sizes.
		Carrying case (WT3004) Provides storage space for the WT3-201 tester, optional ring terminal fixture, AC adapter, USB cable, and accessories.
		MESUR™gauge software Tabulates and plots load vs. time or individual data points. Also calculates statistics, exports to Excel, and more.
		Certificate of calibration with data
		Calibration kit  Complete set of brackets and hardware for calibration of a wire pull tester. Weights not available from Mark-10

Máy kiểm tra độ bền dây nối đầu cốt WT3-201 hãng Mark 10.