The EL5101 EtherCAT Terminal is an interface for the direct connection of incremental encoders with differential inputs (RS422). A 32/16 bit counter with a quadrature decoder and a 32/16 bit latch for the zero pulse can be read, set or enabled. Incremental encoders with alarm outputs can be connected at the interface’s status input. Interval measurement with a resolution of up to 100 ns is possible. The gate input allows the counter to be halted. The counter state is taken over with a rising edge at the latch input.
Due to the optional interpolating microincrement function, the EL5101 can supply even more precise axis positions for dynamic axes. In addition, it supports the synchronous reading of the encoder value together with other input data in the EtherCAT system via high-precision EtherCAT distributed clocks (DC).
Technical data | EL5101 | ES5101 |
---|---|
Technology | incremental encoder interface RS422 |
Number of channels | 1 |
Encoder connection | A, A (inv), B, B (inv), C,C (inv), differential inputs (RS422); status input 5 V DC; gate/latch input 24 V DC |
Encoder operating voltage | 5 V DC/max. 0.5 A |
Encoder output current | 0.5 A |
Counter | 1 x 16/32 bit switchable |
Input frequency | max. 4 million increments/s (with 4-fold evaluation) |
Quadrature decoder | 4-fold evaluation |
Zero-pulse latch | 32 or 16 bits |
Commands | read, set, enable |
Distributed clocks | yes |
Input signal | difference signal (RS422), single-ended possible |
Supply voltage | 24 V DC (-15 %/+20 %) |
Nominal voltage | 24 V DC at power contact |
Current consumption power contacts | typ. 100 mA + load |
Resolution | 1/256 bit microincrements |
Current consumption E-bus | typ. 130 mA |
Bit width in the process image | 1 x 32 bit input, 1 x 16 bit output, 8 bit control, 8 bit status |
Special features | wire breakage detection, latch and gate function, period duration and frequency measurement, microincrements, timestamping of edges, filters |
Weight | approx. 100 g |
Operating/storage temperature | -25…+60 °C/-40…+85 °C |
Relative humidity | 95 %, no condensation |
Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
Protect. class/installation pos. | IP 20/variable |
Pluggable wiring | for all ESxxxx terminals |
Approvals | CE, UL, Ex |
Related products | |
---|---|
EL5101-0010 | incremental encoder interface, 20 million increments/s (with 4-fold evaluation), no single-ended operation |
EL5101-0011 | Incremental encoder interface with oversampling |
EL5101-0090 | Incremental encoder interface with differential input, 16 bit, TwinSAFE SC |
EtherCAT Terminal-Incremental encoder interface-EL5101 Beckhoff
![Danh mục sản phẩm](http://tmpequipment.com/uploads/layout/Danh-muc-san-pham-icondanhmuc_03.png)
- AT2E
- Ametek
- Aira
- Bircher
- Bihl Wiedemann
- Barksdale
- Brooks Instrument
- Burkert
- Beckhoff
- BAUMULLER
- Bussmann
- Badger Meter
- Baumer
- BCS
- CEBA
- CS Instrument
- DWYER
- Euroswitch
- EBM Papst
- Elau Schneider
- Endress + Hauser
- ELETTROTEK KABEL
- Elco Holding
- Fotoelektrik Pauly
- Fireye
- Fairchild
- Fox Thermal
- Festo
- GINICE
- IPF ELECTRONIC
- IBA
- Indra
- Keller
- KIEPE ELEKTRIK
- Koganei
- KITZ
- Knick
- Land Ametek
- MARK-10
- Matsushima
- Matsui
- Masibus
- Mehrer
- Masoneilan
- Minimax
- Nireco
- Noshok.
- Novotechnik
- Nokeval
- Norgren
- Ohkura
- Pora
- PCI Instrument
- Red Lion
- Rotork
- Soldo
- Teclock
- Telco Sensor
- TDK Lambda
- Vibro-meter
- Wise control
- Weidmuller
- Young tech
- ZAMASENSOR
- Autrol
- Wago
- FineTek
- Riels
- Auma
- Gastron
- Dittmer
- JD Control
- Staubli
- Yamato
- Tempsen
- Schubert Salzer
- Wonil
- Phisher
- Precision Digital
- Moog
- Tek Trol
- Kometer
- Tema Vasconi
- Ceia
- Bronkhorst
- Krohne
- Comet
- Sitec
- ID Insert Deal
- Schneider Electric
- Proface
- Beijing Goda
- PFEIFFER Vacuum
- Okazaki
- DMN WestingHouse
- Kracht
- Sensy
- Hirose Valve
- REIVAX
- Endress Hauser
- CEMB
- Labom
-
Trực tuyến:7
-
Hôm nay:634
-
Tuần này:634
-
Tháng trước:11688
-
Tất cả:2198933
![Video Clip](http://tmpequipment.com/uploads/layout/Video-Clip-iconcotB_16.png)